FT245RBitbangController.cs File Reference

Go to the source code of this file.

Classes
class	DirectOutput.Cab.Out.FTDIChip.FT245RBitbangController
	This is a generic output controller class which are based on the FT245R chip (http://www.ftdichip.com/Products/ICs/FT245R.htm). Only units using the chip in bitbang mode are supported by this output controller class. The SainSmart USB relay boards (http://www.sainsmart.com/arduino-compatibles-1/relay/usb-relay.html) are compatible with this output controller, but other hardware which is based on the same controller chip might be compatible as well. Generally controller units which is exclusively using the FT245R (no extra cpu on board) and having max. 8 output ports are likely to be compatible. Please let me know, if you have tested other hardware successfully, so I can ammend the docu. More...

Namespaces
package	DirectOutput.Cab.Out.FTDIChip
	Namespace for the FTD2XX_NET class (used for communication with FTDI chips and for generic FTDI chip output controllers.