WIP
DirectOutput framework for virtual pinball cabinets WIP
|
Go to: Overview |
EEPROM structure specific to FT2232H devices. Inherits from FT_EEPROM_DATA. More...
Public Attributes | |
bool | PullDownEnable = false |
Determines if IOs are pulled down when the device is in suspend More... | |
bool | SerNumEnable = true |
Determines if the serial number is enabled More... | |
bool | ALSlowSlew = false |
Determines if AL pins have a slow slew rate More... | |
bool | ALSchmittInput = false |
Determines if the AL pins have a Schmitt input More... | |
byte | ALDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the AL pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA More... | |
bool | AHSlowSlew = false |
Determines if AH pins have a slow slew rate More... | |
bool | AHSchmittInput = false |
Determines if the AH pins have a Schmitt input More... | |
byte | AHDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the AH pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA More... | |
bool | BLSlowSlew = false |
Determines if BL pins have a slow slew rate More... | |
bool | BLSchmittInput = false |
Determines if the BL pins have a Schmitt input More... | |
byte | BLDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the BL pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA More... | |
bool | BHSlowSlew = false |
Determines if BH pins have a slow slew rate More... | |
bool | BHSchmittInput = false |
Determines if the BH pins have a Schmitt input More... | |
byte | BHDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the BH pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA More... | |
bool | IFAIsFifo = false |
Determines if channel A is in FIFO mode More... | |
bool | IFAIsFifoTar = false |
Determines if channel A is in FIFO target mode More... | |
bool | IFAIsFastSer = false |
Determines if channel A is in fast serial mode More... | |
bool | AIsVCP = true |
Determines if channel A loads the VCP driver More... | |
bool | IFBIsFifo = false |
Determines if channel B is in FIFO mode More... | |
bool | IFBIsFifoTar = false |
Determines if channel B is in FIFO target mode More... | |
bool | IFBIsFastSer = false |
Determines if channel B is in fast serial mode More... | |
bool | BIsVCP = true |
Determines if channel B loads the VCP driver More... | |
bool | PowerSaveEnable = false |
For self-powered designs, keeps the FT2232H in low power state until BCBUS7 is high More... | |
Public Attributes inherited from DirectOutput.Cab.Out.FTDIChip.FTDI.FT_EEPROM_DATA | |
UInt16 | VendorID = 0x0403 |
Vendor ID as supplied by the USB Implementers Forum More... | |
UInt16 | ProductID = 0x6001 |
Product ID More... | |
string | Manufacturer = "FTDI" |
Manufacturer name string More... | |
string | ManufacturerID = "FT" |
Manufacturer name abbreviation to be used as a prefix for automatically generated serial numbers More... | |
string | Description = "USB-Serial Converter" |
Device description string More... | |
string | SerialNumber = "" |
Device serial number string More... | |
UInt16 | MaxPower = 0x0090 |
Maximum power the device needs More... | |
bool | SelfPowered = false |
Indicates if the device has its own power supply (self-powered) or gets power from the USB port (bus-powered) More... | |
bool | RemoteWakeup = false |
Determines if the device can wake the host PC from suspend by toggling the RI line More... | |
EEPROM structure specific to FT2232H devices. Inherits from FT_EEPROM_DATA.
Definition at line 1422 of file FTD2XX_NET.cs.
byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.AHDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the AH pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA
Definition at line 1455 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.AHSchmittInput = false |
Determines if the AH pins have a Schmitt input
Definition at line 1451 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.AHSlowSlew = false |
Determines if AH pins have a slow slew rate
Definition at line 1447 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.AIsVCP = true |
Determines if channel A loads the VCP driver
Definition at line 1495 of file FTD2XX_NET.cs.
byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.ALDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the AL pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA
Definition at line 1443 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.ALSchmittInput = false |
Determines if the AL pins have a Schmitt input
Definition at line 1439 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.ALSlowSlew = false |
Determines if AL pins have a slow slew rate
Definition at line 1435 of file FTD2XX_NET.cs.
byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.BHDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the BH pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA
Definition at line 1479 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.BHSchmittInput = false |
Determines if the BH pins have a Schmitt input
Definition at line 1475 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.BHSlowSlew = false |
Determines if BH pins have a slow slew rate
Definition at line 1471 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.BIsVCP = true |
Determines if channel B loads the VCP driver
Definition at line 1511 of file FTD2XX_NET.cs.
byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.BLDriveCurrent = FT_DRIVE_CURRENT.FT_DRIVE_CURRENT_4MA |
Determines the BL pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA
Definition at line 1467 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.BLSchmittInput = false |
Determines if the BL pins have a Schmitt input
Definition at line 1463 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.BLSlowSlew = false |
Determines if BL pins have a slow slew rate
Definition at line 1459 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.IFAIsFastSer = false |
Determines if channel A is in fast serial mode
Definition at line 1491 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.IFAIsFifo = false |
Determines if channel A is in FIFO mode
Definition at line 1483 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.IFAIsFifoTar = false |
Determines if channel A is in FIFO target mode
Definition at line 1487 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.IFBIsFastSer = false |
Determines if channel B is in fast serial mode
Definition at line 1507 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.IFBIsFifo = false |
Determines if channel B is in FIFO mode
Definition at line 1499 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.IFBIsFifoTar = false |
Determines if channel B is in FIFO target mode
Definition at line 1503 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.PowerSaveEnable = false |
For self-powered designs, keeps the FT2232H in low power state until BCBUS7 is high
Definition at line 1515 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.PullDownEnable = false |
Determines if IOs are pulled down when the device is in suspend
Definition at line 1427 of file FTD2XX_NET.cs.
bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT2232H_EEPROM_STRUCTURE.SerNumEnable = true |
Determines if the serial number is enabled
Definition at line 1431 of file FTD2XX_NET.cs.