 |
WIP
DirectOutput framework for virtual pinball cabinets WIP
|
Go to: Overview |
|
WIP
DirectOutput framework for virtual pinball cabinets WIP
|
Go to: Overview |
EEPROM structure specific to X-Series devices. Inherits from FT_EEPROM_DATA. More...
Public Attributes | |
| bool | PullDownEnable = false |
| Determines if IOs are pulled down when the device is in suspend More... | |
| bool | SerNumEnable = true |
| Determines if the serial number is enabled More... | |
| bool | USBVersionEnable = true |
| Determines if the USB version number is enabled More... | |
| UInt16 | USBVersion = 0x0200 |
| The USB version number: 0x0200 (USB 2.0) More... | |
| byte | ACSlowSlew |
| Determines if AC pins have a slow slew rate More... | |
| byte | ACSchmittInput |
| Determines if the AC pins have a Schmitt input More... | |
| byte | ACDriveCurrent |
| Determines the AC pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA More... | |
| byte | ADSlowSlew |
| Determines if AD pins have a slow slew rate More... | |
| byte | ADSchmittInput |
| Determines if AD pins have a schmitt input More... | |
| byte | ADDriveCurrent |
| Determines the AD pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA More... | |
| byte | Cbus0 |
| Sets the function of the CBUS0 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_GPIO, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE More... | |
| byte | Cbus1 |
| Sets the function of the CBUS1 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_GPIO, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE More... | |
| byte | Cbus2 |
| Sets the function of the CBUS2 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_GPIO, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE More... | |
| byte | Cbus3 |
| Sets the function of the CBUS3 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_GPIO, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE More... | |
| byte | Cbus4 |
| Sets the function of the CBUS4 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE More... | |
| byte | Cbus5 |
| Sets the function of the CBUS5 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE More... | |
| byte | Cbus6 |
| Sets the function of the CBUS6 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE More... | |
| byte | InvertTXD |
| Inverts the sense of the TXD line More... | |
| byte | InvertRXD |
| Inverts the sense of the RXD line More... | |
| byte | InvertRTS |
| Inverts the sense of the RTS line More... | |
| byte | InvertCTS |
| Inverts the sense of the CTS line More... | |
| byte | InvertDTR |
| Inverts the sense of the DTR line More... | |
| byte | InvertDSR |
| Inverts the sense of the DSR line More... | |
| byte | InvertDCD |
| Inverts the sense of the DCD line More... | |
| byte | InvertRI |
| Inverts the sense of the RI line More... | |
| byte | BCDEnable |
| Determines whether the Battery Charge Detection option is enabled. More... | |
| byte | BCDForceCbusPWREN |
| Asserts the power enable signal on CBUS when charging port detected. More... | |
| byte | BCDDisableSleep |
| Forces the device never to go into sleep mode. More... | |
| ushort | I2CSlaveAddress |
| I2C slave device address. More... | |
| UInt32 | I2CDeviceId |
| I2C device ID More... | |
| byte | I2CDisableSchmitt |
| Disable I2C Schmitt trigger. More... | |
| byte | FT1248Cpol |
| FT1248 clock polarity - clock idle high (1) or clock idle low (0) More... | |
| byte | FT1248Lsb |
| FT1248 data is LSB (1) or MSB (0) More... | |
| byte | FT1248FlowControl |
| FT1248 flow control enable. More... | |
| byte | RS485EchoSuppress |
| Enable RS485 Echo Suppression More... | |
| byte | PowerSaveEnable |
| Enable Power Save mode. More... | |
| byte | IsVCP |
| Determines whether the VCP driver is loaded. More... | |
 Public Attributes inherited from DirectOutput.Cab.Out.FTDIChip.FTDI.FT_EEPROM_DATA | |
| UInt16 | VendorID = 0x0403 |
| Vendor ID as supplied by the USB Implementers Forum More... | |
| UInt16 | ProductID = 0x6001 |
| Product ID More... | |
| string | Manufacturer = "FTDI" |
| Manufacturer name string More... | |
| string | ManufacturerID = "FT" |
| Manufacturer name abbreviation to be used as a prefix for automatically generated serial numbers More... | |
| string | Description = "USB-Serial Converter" |
| Device description string More... | |
| string | SerialNumber = "" |
| Device serial number string More... | |
| UInt16 | MaxPower = 0x0090 |
| Maximum power the device needs More... | |
| bool | SelfPowered = false |
| Indicates if the device has its own power supply (self-powered) or gets power from the USB port (bus-powered) More... | |
| bool | RemoteWakeup = false |
| Determines if the device can wake the host PC from suspend by toggling the RI line More... | |
EEPROM structure specific to X-Series devices. Inherits from FT_EEPROM_DATA.
Definition at line 1760 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.ACDriveCurrent |
Determines the AC pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA
Definition at line 1789 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.ACSchmittInput |
Determines if the AC pins have a Schmitt input
Definition at line 1785 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.ACSlowSlew |
Determines if AC pins have a slow slew rate
Definition at line 1781 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.ADDriveCurrent |
Determines the AD pins drive current in mA. Valid values are FT_DRIVE_CURRENT_4MA, FT_DRIVE_CURRENT_8MA, FT_DRIVE_CURRENT_12MA or FT_DRIVE_CURRENT_16MA
Definition at line 1801 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.ADSchmittInput |
Determines if AD pins have a schmitt input
Definition at line 1797 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.ADSlowSlew |
Determines if AD pins have a slow slew rate
Definition at line 1793 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.BCDDisableSleep |
Forces the device never to go into sleep mode.
Definition at line 1901 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.BCDEnable |
Determines whether the Battery Charge Detection option is enabled.
Definition at line 1893 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.BCDForceCbusPWREN |
Asserts the power enable signal on CBUS when charging port detected.
Definition at line 1897 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.Cbus0 |
Sets the function of the CBUS0 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_GPIO, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE
Definition at line 1809 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.Cbus1 |
Sets the function of the CBUS1 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_GPIO, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE
Definition at line 1817 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.Cbus2 |
Sets the function of the CBUS2 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_GPIO, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE
Definition at line 1825 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.Cbus3 |
Sets the function of the CBUS3 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_GPIO, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE
Definition at line 1833 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.Cbus4 |
Sets the function of the CBUS4 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE
Definition at line 1841 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.Cbus5 |
Sets the function of the CBUS5 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE
Definition at line 1849 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.Cbus6 |
Sets the function of the CBUS6 pin for FT232H devices. Valid values are FT_CBUS_TRISTATE, FT_CBUS_RXLED, FT_CBUS_TXLED, FT_CBUS_TXRXLED, FT_CBUS_PWREN, FT_CBUS_SLEEP, FT_CBUS_DRIVE_0, FT_CBUS_DRIVE_1, FT_CBUS_TXDEN, FT_CBUS_CLK24, FT_CBUS_CLK12, FT_CBUS_CLK6, FT_CBUS_BCD_CHARGER, FT_CBUS_BCD_CHARGER_N, FT_CBUS_VBUS_SENSE, FT_CBUS_BITBANG_WR, FT_CBUS_BITBANG_RD, FT_CBUS_TIME_STAMP, FT_CBUS_KEEP_AWAKE
Definition at line 1857 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.FT1248Cpol |
FT1248 clock polarity - clock idle high (1) or clock idle low (0)
Definition at line 1917 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.FT1248FlowControl |
FT1248 flow control enable.
Definition at line 1925 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.FT1248Lsb |
FT1248 data is LSB (1) or MSB (0)
Definition at line 1921 of file FTD2XX_NET.cs.
| UInt32 DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.I2CDeviceId |
I2C device ID
Definition at line 1909 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.I2CDisableSchmitt |
Disable I2C Schmitt trigger.
Definition at line 1913 of file FTD2XX_NET.cs.
| ushort DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.I2CSlaveAddress |
I2C slave device address.
Definition at line 1905 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.InvertCTS |
Inverts the sense of the CTS line
Definition at line 1873 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.InvertDCD |
Inverts the sense of the DCD line
Definition at line 1885 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.InvertDSR |
Inverts the sense of the DSR line
Definition at line 1881 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.InvertDTR |
Inverts the sense of the DTR line
Definition at line 1877 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.InvertRI |
Inverts the sense of the RI line
Definition at line 1889 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.InvertRTS |
Inverts the sense of the RTS line
Definition at line 1869 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.InvertRXD |
Inverts the sense of the RXD line
Definition at line 1865 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.InvertTXD |
Inverts the sense of the TXD line
Definition at line 1861 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.IsVCP |
Determines whether the VCP driver is loaded.
Definition at line 1937 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.PowerSaveEnable |
Enable Power Save mode.
Definition at line 1933 of file FTD2XX_NET.cs.
| bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.PullDownEnable = false |
Determines if IOs are pulled down when the device is in suspend
Definition at line 1765 of file FTD2XX_NET.cs.
| byte DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.RS485EchoSuppress |
Enable RS485 Echo Suppression
Definition at line 1929 of file FTD2XX_NET.cs.
| bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.SerNumEnable = true |
Determines if the serial number is enabled
Definition at line 1769 of file FTD2XX_NET.cs.
| UInt16 DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.USBVersion = 0x0200 |
The USB version number: 0x0200 (USB 2.0)
Definition at line 1777 of file FTD2XX_NET.cs.
| bool DirectOutput.Cab.Out.FTDIChip.FTDI.FT_XSERIES_EEPROM_STRUCTURE.USBVersionEnable = true |
Determines if the USB version number is enabled
Definition at line 1773 of file FTD2XX_NET.cs.
1.8.9.1 
